Prosoft MVI46-PDPMV1 PROFIBUS DP-V1 主站網絡接口模塊

如果Ethernet/IP模塊是網橋模塊，則可以通過右鍵單擊擴展打開模塊并選擇掃描選項。與前一個示例一樣，遠程服務器的DF1設置非常重要設備與MVI46-PDPMV1相匹配。應配置MVI46-PDPMV1對于全雙工，雖然使用橋接模式，但不支持任何映射項必修的。

該模塊可以模擬多個目標DF1節點地址，因此將多條消息路由到不同的以太網設備。因此，這一點很重要在每個映射記錄中輸入正確的關聯DF1節點地址。使用PCCC數據消息時，可通過以下方式配置連接類：選擇類別3或未連接（UCMM）消息。這是由從“橋”選項卡中的“連接”下拉框中選擇?？梢允謩?dòng)輸入控制器路徑，也可以通過
單擊瀏覽按鈕。目標瀏覽器要求控制器可用在網絡上。目標瀏覽器將打開并自動掃描所有以太網/IP設備。如果Ethernet/IP模塊是網橋模塊，則可以通過右鍵單擊擴展打開模塊并選擇掃描選項。

If the Ethernet / IP module is a bridge module, you can right-click the expansion module to open it and select the scan option. As in the previous example, the DF1 setting of the remote server is very important, and the device matches mvi46-pdpmv1. Mvi46-pdpmv1 shall be configured. For full duplex, although the bridge mode is used, it does not support any required mapping items.

The module can simulate multiple target DF1 node addresses, so it routes multiple messages to different Ethernet devices. Therefore, it is important to enter the correct associated DF1 node address in each mapping record. When using PCCC data messages, you can configure the connection class by selecting Category 3 or unconnected (ucmm) messages. This is selected from the connection drop-down box in the bridge tab. You can enter the controller path manually or through the

Click the Browse button. The target browser requires the controller to be available on the network. The target browser opens and automatically scans all Ethernet / IP devices. If the Ethernet / IP module is a bridge module, you can right-click the expansion module to open it and select the scan option.

公司主營進口工控備件，大部分工控備件我們都能幫您從國外調到，由于型號品種繁多，如您需要的型號在本店搜索不到，歡迎隨時咨詢。
聯系人：張經理
聯系電話：15359317083（微信同號）
QQ：3433465711
郵箱： 3433465711@qq.com