| 詳細參數 | |||
|---|---|---|---|
| 品牌 | Honeywell | 型號 | 05701-A-0511 |
| 結構形式 | 模塊式 | 安裝方式 | 控制室安裝 |
| LD指令處理器 | 硬PLC | 工作電壓 | 18V至32V直流 |
| 產品認證 | CE | 環境溫度 | 0至70°C |
| 環境濕度 | 0到90%的相對濕度,無冷凝 | 加工定制 | 否 |
| 重量 | 0.165公斤 | ||
05701-A-0511
傳統的繼電器控制系統中使用了大量的中間繼電器、時間繼電器。由于觸點接觸不良，容易出現故障。PLC用軟件代替大量的中間繼電器和時間繼電器，僅剩下與輸入和輸出有關的少量硬件元件，接線可減少到繼電器控制系統的十分之一到百分之一，因觸點接觸不良造成的故障大為減少。
PLC使用了一系列硬件和軟件抗干擾措施，具有很強的抗干擾能力，平均無故障時間達到數萬小時以上，可以直接用于有強烈干擾的工業生產現場，PLC大用戶公認為最可靠的工業控制設備之一。 PLC用軟件功能取代了繼電器控制系統中大量的中間繼電器、時間繼電器、計數器等器件，使控制柜的設計、安裝、接線工作量大大減少。 PLC的梯形圖程序可以用順序控制設計法來設計。這種編程方法很有規律，很容易掌握。對于復雜的控制系統，如果掌握了正確的設計方法，設計梯形圖的時間比設計繼電器系統電路圖的時間要少得多。
可以在實驗室模擬調試PLC的用戶程序，輸入信號用小開關來模擬，可通過PLC發光二極管觀察輸出信號的狀態。完成了系統的安裝和接線后，在現場的統調過程中發現的問題一般通過修改程序就可以解決，系統的調試時間比繼電器系統少得多。
First, the development of PLC network technology, which has two trends: on the one hand, PLC network system is no longer a self-contained closed system, but rapidly develops to an open system. In addition to bing their own unique PLC network system to complete equipment control tasks, major brands of PLC can also network with the upper computer management system to realize inbation exchange, Become a part of the whole inbation management system; On the other hand, fieldbus technology has been widely used. PLC and other inbligent equipment installed on the site, such as inbligent instruments, sensors, inbligent solenoid valves, inbligent drive actuators, etc, It is connected through a transmission medium (such as twisted pair, coaxial cable and optical cable) and transmits inbation to each other according to the same communication protocol, so as to b a field industrial control network. Compared with a simple PLC remote network, this network has more flexible configuration, more convenient capacity expansion, lower cost, better perbance price ratio and more open significance.
